 |
|
|
OEM : OEM Conductivity Sensor
OEM : OEM Conductivity Sensor : Description
The OEM Conductivity sensor is a calibrated sensor with electronic board set, which can be configured to meet specific spatial requirements.
OEM : OEM Conductivity Sensor : Summary Information:
| Name: | OEM Conductivity Sensor | | Category: | OEM | | Model: | n/a | Number: | n/a | | Description: | The OEM Conductivity sensor is a calibrated sensor with electronic board set, which can be configured to meet specific spatial requirements. | | Configuration: | In-line | | Application: | Often integrated onto vehicles (ie. AUVs, ROVs) or other other platforms (ie. helicopter deployed dipping sonars) where a complete instrument pressure housing is not permitted. | | Credibility Note: | n/a | | Case Study Link : | n/a | | Price: | Consult factory |
OEM : OEM Conductivity Sensor : Usage Information:
| Int Description: | In-line OEM C: SUB G0002 | | Max Number Of Sensors: | n/a | | Depth Rating: | n/a | Housing Material: | No pressure housing | | Weight Air: | n/a | | Weight Water: | n/a | | Length: | 90.6 | | Diameter: | 30.2 | | Power Source : | External | | Housing Notes: | Electronics not included in dimensions; Sensor protrudes from assembly in-line but water enters glass crosses at right angles to assembly |
OEM : OEM Conductivity Sensor : Sensor Information:
| Name: | Conductivity | | Manufacturer: | Applied Microsystems | | Type: | Conductive | Model: | n/a | | Accuracy: | 0.01 mS/cm; 0.005 mS/cm precision | | Range: | 0 - 7 S/m or 0 - 70 mS/cm | | Response Time: | 25ms @ 1m/s | | Max. Frequency: | 25Hz | | Maximum Depth(m): | 6000m | | Resolution: | 0.0015 mS/cm | | Stability | n/a | | Location: | n/a | | Notes: | The Applied Microsystems conductivity sensor is short, with a length of just under 3 cm. Sensor length plays a critical role in determining resistance to the introduction of new flows into the sensor cavity, and hence response times. The equation for response time is as follows:
Response Time = (0.85 * Length of Sensor ) / Flow Speed.
Using the above, our conductivity sensor has a response time of 25 milliseconds in a 1.0 m/second flow environment and 255 milliseconds in a 0.1 m/second flow environment. Given the above, no pumps or flow tubes are required. |
Click here for the full list of Applied Microsystems products | | | |
